This is a black LCD replacement screen with ribbon for the Akai MPC 1000.
This screen changes your MPC 1000 LCD screen from the nasty green to the great looking black back light that this LCD screen produces. Check below for the installation video (note: the video is for the XLCD screen, but the steps are nearly the same.)
It includes ribbon to install on MPC. You may need to reinstall your OS to format this screen. It Works with the JJ OS and Akai 2.11
When using the AKAI 2.11:
Setting will need to be adjusted at each startup (Shift + Data Wheel). Setting will remain until power off.
When using the JJ OS1:
You just adjust screen contrast at startup by (HOLD STOP + DATA WHEEL)
When using the JJ OS 2:
Upon initial installation, set the screen contrast angle, reinstall JJOS2 via the load screen. (HOLD STOP + DATA WHEEL) The settings should stay.
NOTE: If screen is blank you may have to adjust the contrast of the screen. The screens sit a little lower in the LCD window than the standard screen. From certain angles it becomes more apparent with the bottom F1-F6 options, any questions please email us at firstname.lastname@example.org - These screens are brand new, however the ribbon cables on them have been recycled from previous Green MPC1000 screens.
NOTE: This product is not manufactured by or endorsed by Akai. MPCstuff.com is not responsible in anyway with any damage that may occur by installing this screen.