Roland SP 404SX / SP 404 (OG) / SP 404A - Rubber Thick Fat Pad Set Replacement Upgrade
***Very Important:*** The B STOCK colored pads will only have full color over the top of the pad the protrudes over the casing. This was a mistake at the factory, but unfortunately they could not be remade. The lower portion will be less intense color coating. This will not have a big effect on the pads look when installed since they do not protrude much over the casing that can be seen. If you have any questions about his shoot us a email and we can explain a bit more. We also have pictures above (scroll to Orange color) - We still offer full 90 day warranty on them
B STOCK PICTURES:
These pads allow light to pass through just like the originals - the black pads shine through on just the numbers (as pictured). These pads are 1.5mm taller and give an overall better feel to the pads. These pads are also slightly softer than the original pads. For the ultimate look and feel, the MPCstuff thick pads are a must for the iconic SP404.
If you are looking for the MFX they are sold seperately (above 6 rubber button set it can be found here - https://www.mpcstuff.com/roland-sp-404sx-sp-404-og-sp-404a-mfx-set-pad-set-replacement-rubber/ )
These new style pad upgrades will provide a very stable, thicker, and slightly softer pad for your Roland SP404. They offer clear bottoms so they will allow light to go through them, just like the original pads. The install will only take about 30-60 minutes and requires very little expertise -- see video below (or visit our YouTube page here: http://youtube.com/mpcstuff) for install. The pads are available in various colors, only available from MPCstuff.com!
- Rubber Pad Set - Choose color above
This Part will fit:
All SP404 models
**Please note this part may fit other units, if you have fitment questions please email us at email@example.com **
Clear Red Topped, Clear Black Topped, Black Clear Numbers, Purple Clear Numbers, Green Clear Numbers, Mint Clear Numbers, Orange Clear Numbers, Pink Clear Numbers, Carolina Blue Clear Numbers, Yellow Clear Numbers
***Please Note: The design on top are like the SP404SX pads, they will fit just the same on the SP404 and the SP404A. The only difference for the "OG" SP-404 will be some of the pad banks will not match. The printed buttons on these pads will not change the function on the SP404 "OG", but will offer a great replacement for faded pads!
***Very Important: The colored pads will only have full color over the top of the pad the protrudes over the casing. The lower portion will not be fully painted. This will not have an affect on the pads look when installed, however when out of the unit it may look a little strange. If you have any questions about his shoot us a email and we can explain a bit more.
If you have any questions about this refer to the install video or email us at firstname.lastname@example.org
These pads are not the factory Roland parts. They are made by MPCstuff. These parts are designed and engineered to function above the standards of the originals factory pads. Please keep in mind pad feel can be a preference so the pad sensitivity settings may need to be adjusted to your overall preference.
Pads purchased from MPCstuff include a 90 day limited warranty. (if you have any questions about the warranty please contact us)
Installation Guides / Videos: